Brackets for lighting columns. Steel and Aluminium.
3 types of brackets – ST, ST-X and ST-Y
ST bracket type 
ST-X bracket type 
ST-Y bracket type
Note:
The type St bracket for steel posts comes with a pivot head which allows orientation setting within the full rotation angle range.
Installed head details
Head parts:
1 – extension piece with locating head
2 – bottom pivot head
3 – top pivot head
4 – spring washer
5 – fastening screw
6 – blind cap
The head is available in two versions: the single pivot head with one beam (arm) and the double pivot head with two beams (arms), as shown above. The head can be installed on all types of lamp posts with one or two arm brackets (and the maximum arm length of 0.7m) or the single or double floodlight beam. The head facilitates setting the arms (beams) at any angle relative one to the other and the post axis (for the double pivot head), or setting the arm (beam) at any angle relative to the post axis (for the single pivot head).
Brackets for walls. Steel and aluminium.
Each bracket features eight (8) fixing holes for M12 bolts.
If longer reaches are required, the bracket fixing shall be investigated according to the lamp fixture type (i.e. weight and wind loaded surface) and the Wind Zone acc. to EN 1991-1-4.
| Bracket type | α | H2S(min) | Φd | W | R(max) | Weight [kg] | ||
| steel | aluminium | deg | m | mm | m | m | steel | aluminium |
| WS/St | WS/AL | 5″; 10″; 15″ | 0,75 | 48;60 | 0,5 | – | 7,5 | 2,6 |
| 1,0 | 9,2 | 3,2 | ||||||
| 1,5 | 10,7 | 3,8 | ||||||
| 2,0 | 12,6 | 4,4 | ||||||
| WS/St-Y | WS/AL-Y | 5″; 10″; 15″ | 1,50 | 48;60 | 1,0 | 0,6 | 11,0 | 4,2 |
| 1,5 | 13,8 | 5,1 | ||||||
| 2,0 | 16,1 | 6,1 | ||||||
| WS/St-X | WS/AL-X | 5″; 10″; 15″ | 2,0 | 48;60 | 1,5 | 1,3 | 15,5 | 6,5 |
| 2,0 | 17,8 | 7,3 | ||||||
| 2,5 | 20,1 | 8,2 | ||||||
Ordering the brackets:
Example 1: WS/AL/W1,5/5°/Ø60 (type AL wall-mounted bracket, arm reach W=1,5m, lamp fixture elevation angle 5°, lamp fixture holder stub size Ø60mm).
Example 2: WS/St-X/W2,5/15°/Ø48 (type St-X wall-mounted bracket, arm reach W=2,5m, lamp fixture elevation angle 15°, lamp fixture holder stub size Ø48mm).
